500MW BASH
Uzbekistan, Utility-Scale Wind
500MW wind
Power Plant Controller, NEGU dispatch management and RTU supply for 500 kV & 33 kV grid interconnection
View case study
Power that keeps running, whatever the source.
PES builds the controls, SCADA and switchgear that let solar, wind, batteries, generators and the grid work as one system, from Karachi to NEOM.
2018Founded in Karachi
50+Engineers and specialists
100+Customers worldwide
10Countries delivered
Works with
One system
Every source, one controller.
Generation
PV and wind plant SCADA with string and central inverters, loggers, weather stations and turbine integration.
Storage and backup
Battery storage with state-of-charge management, plus generators that start and stop automatically when they are needed.
Control
The controller balances generation, storage and demand in real time, deciding which sources run and how load is shared.
Grid and site
Synchronization and protection keep the site connected to the grid and supply steady, in grid-tied or island mode.
Scroll to fly through the site
See it work
Move the sliders. Watch the controller decide.
This is a simplified 12 MW site with solar, wind, battery storage, generators and a grid connection. It shows the logic our controllers apply, not a real design.
What we build
Eight ways we make a power system behave.
Every system is engineered around your plant, your sources and your operators, then delivered as one accountable scope from design to commissioning and support.
Microgrid solutions
Diesel, solar, wind and storage working as one system under a single controller.
SCADA and monitoring
One real-time view of generation, distribution and renewable assets.
Synchronization
Multi-genset and grid-parallel operation on DEIF AGC-4 MKII and AGC-150 controllers.
Automation
Process and grid automation, from a single PLC to multi-layer distributed control.
Cloud APM
PES's own cloud platform for energy visibility, benchmarking and alerts.
Design and consultancy
Load flow, fault level and scheme design settled before equipment is ordered.
Environment monitoring
Weather sensors and yield analysis built for PV plant performance.
LV / MV switchgear
Low and medium voltage panels designed around your real distribution needs.
All solutions
Eight ways we make a power system behave.
Featured projects
Built and commissioned on site.
Redundant and standalone SCADA and control systems across cement, textile, utility, stadium and infrastructure projects.
NEOM Village, 4 sites
NEOM, Saudi Arabia (4 sites)6 MW solar, 6 MWh battery
Lucky Cement
Nooriabad, Pakistan31 MW solar, 28 MW wind, 8 MWh batteryLiberty Textile
Pakistan9 MW solar, 9 MW wind, 8 MWh battery500MW BASH
Uzbekistan500 MW windREDCO Lusail Stadium
Lusail, Qatar5.3 MW solar
Emerge Masdar
Masdar, UAE6 MW solar, 6 MWh battery
Soorty Denim
Nooriabad, Pakistan9 MW solar, 18 MW wind, 8 MWh battery22MW Naghlu
Naghlu, Afghanistan22 MW solarDelivered projects
From a 2 MW stadium to a 500 MW wind farm.
Redundant and standalone SCADA and control systems across cement, textile, utility, stadium and infrastructure projects. Scroll to stack through the largest.
Lucky Cement
Nooriabad, Pakistan, Cement & Manufacturing
59MW solar and wind with 8 MWh of battery storage
Redundant SCADA & plant controls, weather station, off-grid operation via BESS and renewable energy arbitrage
View case studySoorty Denim
Nooriabad, Pakistan, Textile
27MW solar and wind with 8 MWh of battery storage
Redundant SCADA & controls with Grid/Genset synchronization, weather station, off-grid operation via BESS and energy arbitrage
View case study22MW Naghlu
Naghlu, Afghanistan, Utility-Scale Solar
22MW solar
Full EPC, testing & commissioning, plant SCADA & controls, LV/MV panels, electrical BoP, PV design and grid impact studies
View case studyLiberty Textile
Pakistan, Textile
18MW solar and wind with 8 MWh of battery storage
Redundant SCADA & controls, off-grid operation via BESS, energy arbitrage, automatic DG start/stop, SOC management and solar firming
View case studyWhy PES
Engineers who commission plants, not just sell them.
We are vendor-independent, we take the whole scope, and the people who design your system are the ones who support it.
Vendor-independent
We identify the best technology available rather than steering you toward one manufacturer, then support it with deep multi-vendor expertise.
Turnkey execution
From design and engineering through to commissioning and after-sales support, delivered as one accountable scope.
Extensive data acquisition
Broad protocol and device coverage means more of your plant is visible in one system, not split across disconnected tools.
Intelligent KPI monitoring
Monitoring built around the indicators that drive availability and yield, rather than raw data with no interpretation.
Standards compliant
Systems engineered to recognised industrial and substation standards so they integrate cleanly with existing infrastructure.
Experienced engineering team
Founded by engineers with deep field experience, delivering reliable and cost-effective results across demanding sites.
Where we work
Ten countries and counting.
Head office in Karachi, with a regional office in Dubai. Pick a country to see the projects we delivered there.
Questions
Answers before you call.
What industries and asset types does PES serve?
SCADA, EMS and controls for grid, substation, power-plant, PV, wind and hybrid systems, serving cement, textile, utility, infrastructure and government clients across multiple regions.
Which protocols and standards do you support?
Modbus TCP and RTU, DNP3 and OPC for industrial communication, plus IEC 61850 and IEC 60870-5-104 for substation automation, with KPI calculations to IEC standards.
Do you offer both local and central monitoring?
Yes. Local SCADA, EMS and power plant control at site level, and central SCADA and EMS for portfolio-level control and monitoring across all assets.
What support do you provide after commissioning?
Our team provides 24x7 live support for round-the-clock issue rectification, plus field service management, control-room services and remote plant supervision.
Can PES retrofit or migrate an existing SCADA system?
Yes. We offer system migration, retrofit and CMMS services alongside SCADA customization, plant control and grid integration.
Tell us about your site.
Send us the load, the sources and the constraints. An engineer will reply with a clear next step.
Request a quote